Sanipro® XR Up

sanipro in situ

Sanipro XR Up

Discover the Sanipro XR Up, your ultimate solution for hassle-free en-suite and bathroom installations. This advanced macerator pump is expertly designed to efficiently transport black waste water from toilets, basins, showers, and various other appliances. Equipped with a cutting-edge blade mechanism, it effectively grinds up waste into a pulp, allowing for easy discharge through small bore pipework to your drain pipe. Say goodbye to installation challenges and hello to convenience with the Sanipro XR Up.

Why choose this product?
  • Compact, neat and unobtrusive
  • Install a full bathroom effortlessly with the macerator.
  • Convenient top access for easy maintenance.
  • No need to change the pipework – replaces existing Sanifo products


Pump Use

sanipro xr up
Included in the box
  • Saniflo Up
  • Non-return valve
  • Connectors
  • Activated carbon filter to neutralise odours

Dimensions l x w x h (mm)
432 x 239 x 352

210mm depth required behind the WC

Tech Sheet

Saniflo Motor induction motor (no carbon brushes or gears to wear out). Tested over 30,000 cycles.
Watts (Consumption) 400w
Electrical Supply 220-240V 50Hz
Flow rate at max head litres/min 55
Horizontal Discharge 100 metres
Vertical Discharge 5 metres
Gravity fall on horizontal installations 1/200
Discharge Pipe Diameter 22mm
Materials Polypropylene, C.R.P., stainless steel, Neoprene
Type of WC Pan (not included) Short spigot 100mm HO outlet (BS EN 33/37)
Motor RPM 2800 RPM
Normal Running Time WC 10–20 secs approx or as required, to discharge shower etc
Dimensions (vertical height is measured from floor level) (W)432mm x (O/H)352mm x (D)239mm (requires 210mm behind spigot)
Technote– Saniflo recommend a Saniflo approved engineer for every Sanipro installation, repair, and service
– Call PumpMaster on 0800 2922 542
Designed to fit BS EN 33/37 WC pans. As close coupled cistern dimensions vary, it may be necessary, with certain designs, to utilise a spacer between cistern and wall

Saniflo approved engineers – Sales – Service – Spares – Repairs
Call PumpMaster on 0800 2922 542